- Service
Shower Valve Replacement in Barrie & Simcoe County
Mixing Valves | Cartridges | Leak-Tested | 6+ Years In Business Shower running too hot, too cold, dripping, or weak? The mixing valve is usually the culprit. We replace shower valves across Barrie—$175 with an access panel, leak-tested. Steady temperature and good flow, back the same day.
Steady Temperature and Good Flow — Leak-Tested
A shower that scalds when someone flushes, runs lukewarm, drips constantly, or has lost pressure usually needs a new mixing valve or cartridge. With an access panel behind the shower, replacement is a straightforward $175. If your valve is behind tile with no access panel, it's a site-visit job since it involves opening and patching the wall—we'll assess and quote ($300–$500 range). Either way, we leak-test before we close up. Book your shower valve replacement in Barrie today. Most quotes within 24 hours.
- Our Process
How It Works?
From an unreliable, dripping shower to steady temperature and flow, valve replacement is precise plumbing work. We shut off, swap the valve or cartridge, and leak-test before closing up. Just follow the steps below.
Fill the form
Tell us the symptom
Schedule your visit
Steady, safe shower
Why the Mixing Valve Is Usually the Problem
Most shower temperature and pressure complaints trace back to the valve—the part that blends hot and cold. Here's what's involved: WHAT THE VALVE DOES: - Blends hot and cold to your set temperature - Holds pressure steady when other taps run (anti-scald) - Controls flow to the head and tub spout A PROPER REPLACEMENT: - Shut off the water and relieve pressure - Remove the trim and old valve/cartridge - Install the new valve, properly connected - Set anti-scald limits where applicable - Leak-test thoroughly before re-trimming ACCESS MATTERS: - With an access panel: a clean $175 swap - Behind tile, no panel: site visit (open + patch the wall) Sometimes just the cartridge needs replacing—we'll do the least-invasive fix that solves it.
We Replace Shower Valves Across Barrie
Main baths, ensuites, and basement showers. Single-handle and multi-handle valves, cartridges, and anti-scald upgrades across every Barrie neighbourhood from Holly to South Shore to East Bayfield to Allandale.
SCALDING OR TEMPERATURE SWINGS
The classic sign of a failing valve—the shower goes scalding or freezing when a toilet flushes or a tap runs. A new pressure-balancing valve holds your temperature steady and safe.
DRIPPING & CONSTANT RUNNING
A shower that drips or won't fully shut off wastes water and signals a worn cartridge or valve. Replacing it stops the drip and restores a clean, full shut-off.
WEAK OR UNEVEN FLOW
Lost pressure or weak flow from the head, even with the tub spout fine. Often a clogged or failing valve. We replace it to get strong, even flow back to the showerhead.
BEHIND-TILE VALVES
No access panel and the valve is behind tile? That's a site-visit job—we open the wall, replace the valve, and patch—quoted in the $300–$500 range depending on the wall and finish.
An unreliable shower is a daily annoyance and, when it scalds, a safety issue. A new valve fixes the temperature, the drip, and the flow in one visit—$175 with an access panel, leak-tested.
6+ Years of Experience
We've replaced shower valves and cartridges throughout Barrie and Simcoe County—single- and multi-handle, anti-scald upgrades. We do the least-invasive fix that actually solves the problem.
Fast Barrie Response
With an access panel, most valve swaps are a single same-day visit. Same-week scheduling across Barrie and Simcoe County.
Licensed, Insured & Guaranteed
WSIB clearance. Liability coverage. A properly connected valve, anti-scald set, and a thorough leak test. Every job backed by our satisfaction guarantee.
Book Your Barrie Shower Valve Replacement Today With Satisfaction Guaranteed!
- Fixes scalding & temperature swings
- Stops drips and constant running
- Restores strong, even flow
- Leak-tested before re-trimming
Book Your Shower Valve Replacement Appointment
- Pricing
Shower Valve Pricing — Transparent and Detailed
Straightforward pricing—access is the main factor: - Shower valve replacement (access panel present): $175 - Cartridge-only replacement (where that solves it): from $150 - Behind-tile valve, no access panel: $300–$500 site visit (open + patch wall) - Anti-scald / pressure-balance upgrade: included with valve swap We do the least-invasive fix that solves it. All prices plus 13% HST. Free quotes within 24 hours.
-
Shower Valve Replacement $175Use case: Scalding, dripping, or weak shower, access panel present Leak-tested Timeline: same-day [Included] Shut off the water and relieve pressure Remove trim and old valve/cartridge Install the new valve, properly connected Set anti-scald limits where applicable Leak-test thoroughly before re-trimming
-
Cartridge-Only Swap From $150Sometimes only the cartridge has failed. Where that solves the problem, we do the least-invasive fix rather than a full valve.
- Behind-Tile Valve $300–$500
No access panel and the valve is behind tile? Site visit—we open the wall, replace the valve, and patch. Priced by the wall and finish.
- Anti-Scald Upgrade Included
A modern pressure-balancing valve holds your temperature steady when other taps run—included with a valve swap for safer showers.
- What's Included
[Included] Water shut-off and pressure relief Old valve or cartridge removal Proper new-valve connection Anti-scald limit setting where applicable A thorough leak test before re-trim
- Typical Replacement Example $175
Single-handle shower, access panel behind wall Failing valve causing temperature swings New pressure-balance valve installed, leak-tested Total: $175 + HST
Shower Valve Frequently Asked Questions
Here are some common questions we get from our customers.
With an accessible panel behind the shower, replacement is $175. A cartridge-only swap (where that solves it) starts at $150. If the valve is behind tile with no access panel, it’s a site visit in the $300–$500 range because the wall has to be opened and patched. Plus 13% HST.
That’s a failing pressure-balance valve—it can’t hold your temperature steady when cold is drawn elsewhere. A new anti-scald valve fixes it, keeping the temperature stable and safe. It’s the most common reason we replace shower valves.
Often just the cartridge, which is the least-invasive and cheapest fix. We diagnose which it is and do the smaller repair when it’ll actually solve the problem, rather than replacing the whole valve unnecessarily.
Yes, but it’s a site-visit job ($300–$500) because we have to open the wall to reach the valve and then patch it afterward. With an access panel it’s a clean $175 swap. We’ll confirm which applies when you describe your shower.
Yes, when the drip is from a worn valve or cartridge—which it usually is. We replace the failing part and leak-test so the shower shuts off cleanly with no waste.
Often, yes. Weak or uneven flow frequently traces back to a clogged or failing valve. Replacing it commonly restores strong, even flow—we’ll confirm the valve is the cause before recommending it.
With an access panel, most valve replacements are a single same-day visit. Behind-tile jobs take longer because of the wall work and patching. We’ll give you a clear timeline up front.
Yes. WSIB clearance and liability coverage, with proper connections and a thorough leak test. Every shower valve job is backed by our satisfaction guarantee.
Serving Barrie, Bradford, Orillia & Collingwood
Licensed & insured · Simcoe County, ON · WSIB cleared · Since 2018
Barrie · Bradford · Collingwood · Orillia